Re-roofing a Tampa home that already has solar: detach and reset, step by step

Storm damage or plain age eventually forces a re-roof under an existing array. The work has a name — detach and reset — and it goes smoothly when one contractor owns both trades.

The sequence

1. System shutdown at the inverter and AC disconnect, documented.
2. Removal of modules and racking, labeled by plane and position so the reset matches the original permitted layout.
3. On-site staging on racks, off the ground and out of traffic.
4. Roof replacement, including new penetration flashing points where mounts will return.
5. Reinstall of racking and modules, torque-checked.
6. Re-commissioning and confirmation that every module reports in monitoring.

What it costs you beyond dollars

Production downtime. A typical residential detach-and-reset runs a few days to a couple of weeks depending on roof scope and weather. Plan around a shoulder month rather than peak August production if the roof allows waiting.

Warranty and permitting

Removing and reinstalling can affect workmanship warranties from the original installer. Ask in writing who warrants the reset, and confirm whether your jurisdiction requires a permit for the reinstall — many do. Full detail on our removal and reinstall page.

Avoiding it entirely

If your roof is within a few years of end of life, replace it before the array goes up. That is the whole argument for a roof and solar package.

Talk it through with a Tampa crew

Origin is a Tampa-based solar, roofing, battery and electrical contractor (Florida license EC13012465). Start with the quick questionnaire, see the Tampa solar page, or book a consultation — in person, virtual, or a call back.